|
|
| |
|
|
| |
|
|
| |
|
|
| |
 |
|
Multi-Purpose Vise
for BenchMate System
The Multi-Purpose Vise uses the versatile “lift on/lift off” BenchMate mounting system. Unlike other bench vises, you can adjust it to any angle because it tilts and rotates ON two axes. So, your work adjusts to you, adding comfort and efficiency to your environment.
By using the same attachments as the GRS engraving block, the Multi-Purpose Vise solves dozens of holding problems. It is precision-made from steel for rugged dependability. You’ll wonder why all bench vises aren’t made this way.
#004-628 Multi-Purpose
Vise $118.95
Includes vise assembly and wrench. Fits any BenchMate Fixed Mounting Plate. Jaws are 2.3" wide, 1.6" tall and open to 1.8".
More Benchmate Products |
 |
|
#003-520MPV Attachment Set
for Multi-Purpose Vise $98
Includes 30-piece attachment set, two pin plates and 4 jaw pins. |
| Accessories for Ball Vises |
 |
|
#003-520 30-Piece
Attachment Set $78
Includes leather-faced ring clamps plus a variety of pins and other clamps that fit the upper jaw plates of every GRS Block. These 30 pieces help you instantly solve the problems of holding, so you can start working. |
 |
|
Super Pins
#003-547 Set of 2 Super Pins, 3/8" shank $4.90
#003-546 Set of 4 Super Pins, 1/4" shank $8.40
These heavy-duty plastic over steel pins fit the jaw holes in GRS Blocks. Ideal for holding larger items including gun parts firmly without marring. |
 |
|
#003-609 Leather
Pads $5.85
Set of 2. These
thick, top grain leather pads are perfect
for safely holding parts in any engraving
block or vise. You can also use them
with diamond spray for polishing gravers
and tools. leather pads, 2" X 3" |
 |
|
Block Shelves
#004-578 Standard
Block Shelf (7" W x 7" D
x 7" H) $36.95
#004-665 Large Block Shelf with Adjustable Height Bracket
(7" W x 8.25" D x 7" H) $68.
These shelves use the GRS BenchMate fixed mounting plate to hold your engraving block below the front of your bench. Jewelers especially like this because the top of their block is the same height as their bench pin. The Standard Shelf, used mainly with the Standard Block and Magnablock, has some up and down adjustability. The Large Shelf has more height adjustment and a larger tray, especially for the Positioning Vise. The #004-666 Adjustable Height Bracket (item D on page 18) works with either shelf. |
 |
|
Pitchbowl and Pitchcup
#003-022 Pitchbowl,
5" X 3.5" X .5" deep $58
#004-660 Pitchcup, 2" (50mm) diameter $22.95
The pitchbowl and pitchcup have a special material that softens when heated to hold small, fragile, or irregular pieces for engraving, setting and finishing. Fits any vise or engraving block. |
 |
|
#003-623 Contour Vise Jaws $59.
An innovative and safe way to hold irregularly shaped parts. This clever jaw set fits the top holes of any GRS Engraving Vise. The hard rubber-lined jaws automatically conform to grip almost any shape using minimal clamping force. This is the fast and safe way to hold unusual items for engraving or other important work. |
 |
|
#003-622 Knifemaker’s Contour Vise $89.
Designed and Built by an Engraver and Knifemaker
In just seconds you can now hold knives securely for engraving and other detail work with this wonderful vise. Special chain-like linear jaws conform to unusual and compound shapes with ease. Lined with a special hard rubber ribbon, these jaws grip securely without high clamping force. The Knifemaker’s Contour Vise is totally adjustable for a wide range of widths and depths of knives. It mounts in any vise including all known engraving blocks. If you ever work on knives, get one…it’s a well-made bargain. |
 |
|
#003-667 Thermo-Loc
starter kit $32.95
Includes 6" (150mm) square PTFE (Teflon) pad and 1 lb. (450 gm) Thermo-Loc sticks.
Thermo-Loc sticks
#003-664 0.5
lb. (225 gm) $15.95
#003-665 1.0 lb. (450 gm) $26.95
#003-666 5.0 lb. (2.26 kg) $108.95
#003-291 PTFE (Teflon) Pad $11.80 |
 |
|
#003-669 Thermo-Loc
Jaw Kit $68
For GRS Magnablock, Positioning & Low Profile
Includes 2 master upper jaws (one pivoting), 4 threaded bonding strips, bolts and wrench
#003-668 Thermo-Loc
Jaw Kit $68
for GRS Standard Vise
Includes 2 master upper jaws (one pivoting), 4 threaded bonding strips, bolts and wrench. This jaw kit fits only GRS Standard Engraving Vises. |
 |
|
#003-671 Pin
Kit $27.95
for GRS Magnablock, Positioning & Low Profile Vise
Includes 4 each 1/4" short pins, 4 each 1/4" medium pins, 2 each 3/8" short pins, 2 each 3/8" medium pins
#003-670 Pin
Kit $27.95
for GRS Standard Vise
Includes 6 each 1/4" short pins, 3 each 1/4" medium pins |
 
|
|
Micro Hot Air System
Precision Heat for Thermo-Loc®
Originally designed for electronic hot air soldering, this system has many
useful applications including working with Thermo-Loc® materials, welding and repairing many
types of plastics, and more.
It supplies precisely controlled hot air from 210-900°F (100-480°C). Air flow is also adjustable from almost nothing to full flow. It’s truly pinpoint heat.
|
Includes three interchangeable
round nozzles: 0.1", .17", and .3" diameters (2.5mm, 4.4mm, and 7.2mm).
| #006-520 |
Micro Hot Air System, 115 Volt, 60 Hz
|
$198 |
| #006-521 |
Micro Hot Air System, 230 Volt, 50 Hz
|
$238 |
|
 |
|
#004-625 GRS
Hand Ring Clamp $42.95
The GRS Ring Clamp holds rings securely for stone setting, filing, finishing and polishing. Although similar to the BenchMate holder, it’s lighter for hand use. You open and close the jaws by turning the bottom knob. Replaceable jaw inserts hold securely without marring. Every part is machined from solid aluminum or steel. This clamp is safer for you and your work because it won’t slip like other ring clamps. The special collar protects your hands and stops it from slipping off your bench pin. |
 |
|
#004-589 Inside
Ring Holder $69
Includes holder body, 7 collets, expansion screw and wrench
Many wide, delicate or unusual rings are difficult to hold with an outside clamp. This attachment adds inside ring-holding capability to any BenchMate. It gives 200%
more access to the outside of the ring and keeps it from flexing while you work. Channel, bead and bezel settings are surprisingly easy using this inside holder.
From the set of collets, you select the closest size that fits inside the ring. The screw expands the collet to hold the ring securely. These hard plastic collets won’t scratch or mark rings. With an extra collet set, you can “double-stack” collets for extremely wide rings or hold several rings simultaneously for high volume work.
#004-616 Extra Collet Set
for Inside Ring Holder $29.95
Includes 7 collets, expansion screw and wrench |
 |
|
#004-697 Inside
Ring Engraving Holder $49
Hand engraving inside rings is now in strong demand. This unique holder secures rings allowing easy access to the inside. It can be hand-held or mounted in a vise. Made by GRS from solid steel to last a lifetime. |
 |
| Above:
Horizontal Ring Holder (#004-679).
Below:
Vertical Ring Holder (#004-847). |
 |
|
|
#004-679 Horizontal
Inside Ring Holder $43.95
#004-847 Vertical
Inside Ring Holder $39.95
Two models: Vertical & Horizontal
These fixtures securely hold rings from the inside, giving you easy access
for stone setting and ring engraving. Use in any
GRS Block and most vises. Both include holder body, 7 collets, expansion
cone, screws and wrench.
#004-616 Extra Collet Set
for Inside Ring Holder $29.95
Includes 7 collets,
expansion screw and wrench.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
